Click here to register until 01 Aug 2019
]]>Hope to see you there!
]]>Hope to see you there!
]]>
We sincerely hope to see you at this exhibition.
]]>Introducing the new smaller, lighter U Series Power Cylinder with more than 6 tons rated thrust
A new power cylinder that succeeds in providing a smaller, lighter unit with better cost performance while maintaining the same performance of the previous model (T series).
Thanks to newly developed special ball screws and bearings, we succeeded in reducing the total length by a max. of 11% and the mass 40% compared with the previous model (T series). The smaller size and lighter weight makes it easy to replace hydraulic cylinders.
We added a model with a 22 tons rated thrust that we did not have previously. In addition, we will release 32 tons and 50 tons models in 2018. We can now replace hydraulic cylinders in the large thrust range.
In addition to achieving cost reductions compared to previous models thanks to smaller and lighter parts, the power cylinder is electrical so it has much better power savings than hydraulic types, greatly reducing power consumption.
A wet slip clutch is built in at the end of the reducer screw shaft. The use of a special lining provides protection during overloads.
A thrust detection spring unit is built in to the bracket. It is effective during push/pull stopping or when electrical signals are required during overloads.
Exhibition: TOC ASIA 2017
Date: 25 - 26 April 2017
]]> Venue : Level 4 of the Sands Expo & Convention CenterRoselle Ballroom, Marina Bay Sands Expo & Convention Center
10 Bayfront Avenue, Singapore 018956
Booth : #B16
For more information, please see the TOC website http://www.tocevents-asia.com/exhibitors
We sincerely hope to see you at this exhibition.
]]>The goal with the Heavy Duty Chain was finding a way to improve the fatigue strength without changing the chains basic dimensions. Developers reviewed how each component was formed. One critical area was adding Tsubaki's original patented ring coining to the inner plates. Creating plastic deformation around the link plate holes, while maintaining the precision of the plate holes, in turn, influencing the chains performance. In changing the formation methods, Tsubaki has introduced new manufacturing equipment that provides a product with much better performance and dependability.
The pursuit of higher performance has helped Tsubaki create stronger, longer lasting chain. The New G8 Heavy Duty Drive Chain Series have a higher maximum allowable load and higher minimum tensile strength than standard RS Roller Chain.
The main features of the new Heavy Duty products include -
The product series are suited to a range of applications including agricultural machinery, excavators and loaders, drill rigs, mobile port cranes and mining equipment just to name a few.
Where higher maximum allowable load, higher minimum tensile strength, reduced downtime and greater productivity are required, Heavy Duty Drive Chain is the ultimate choice.
]]>As the pioneer in the industry, Tsubaki was the first company to develop a roller chain that uses special oil impregnated sintered bushes. Since its introduction to the market in 1988, Tsubaki Lambda Chain has gained an outstanding reputation in a variety of industries and applications. The product is capable of meeting a wide range of customer needs for longer wear life in lubrication-free environments. This reduces overall long-term costs to the customer.
]]> To celebrate Tsubaki's 100th anniversary the company has launched the Advanced Lambda Chain as G8-Series.Tsubaki re-visited the fundamentals of its manufacturing process. After extensive research and testing a new bush manufacturing technique was developed using new materials, density and oil types. Tsubaki G8 Lambda Chain now uses food grade lubricant and retains the same strength as a traditional bush. These new techniques, coupled with a specially coated pin to reduce running friction gives the end user less downtime and reduced maintenance costs. The new G8 Series ANSI chain now lasts twice as long and the BS 1.3 times as long as previous series. Total cost of ownership using Tsubaki G8 Series Lambda Chain is significantly lower than using traditional chains.
In applications where lubrication is difficult or impossible, Tsubaki G8 Series Lambda is the chain of choice. Lambda is ideal for applications where traditional lubrication methods cannot be used. An example is when chain has direct contact with product/s. Other environments where the operating conditions are not ideal include, cement plants or sawmills where fine dust and contamination can cause serious problems on the chain. These particles can stick to standard lubricated chain clogging the chain and sprockets resulting in articulation problems and eventual derailment.
When long life, reduced downtime and higher productivity are required Tsubaki G8 Series Lambda Chain is the ultimate choice. Available in Long Life Lambda (X-Lambda), High Temperature (KF-Series) and Surface Treated Series.
More information on Tsubaki Lambda Chain
]]>Tsubaki proudly presents the worldwide release of Surface Treated Neptune Chain in American (ANSI) and British (BS) standards. The world's chain solution for applications exposed to water, seawater, chemicals, and high humidity conditions. Tsubaki's Neptune Series comes with the full strength of its carbon steel ANSI and BS standard chain series, which have longer service life in corrosive environments than ever before.
Tsubakimoto Singapore Sales Director, Mr. Hang Lee Juan, comments about Neptune chain, "It is specially developed for Tsubaki centennial anniversary. The chain has superior corrosion and chemical resistant performance.It is the first series of Tsubaki's 100th Anniversary model G8 (Generation 8) series to be released. Tsubaki will launch other G8 Series models, one after another, in the coming year."
]]> Unique Multi-Layer SurfaceWith the unique multi-layer surface, Neptune Chain has superior corrosion and chemical resistance compared to the previous series, NEP Chain. Our special base layer coating is a zinc type followed by a highly chemical resistant top coating and a special resin coating. The roller is also sealed with a special coating to give it superior rust prevention and preserve its durability when engaging with a sprocket.
Neptune Chain's anti-rust performance is superior to previous models. NEP Chain was coated with a traditional plain zinc, and as a result, there were many cases of premature corrosion when used around chemicals. The chemical resistance of the Neptune Series increases this resistance almost 15 times compared to NEP Chain. The better performance of Neptune Chain is one of Tsubaki's commitments to increasing the customer's economic benefit.
Keeping all of the main features of NEP Chain, Neptune Chain has also become one of Tsubaki's environmentally friendly products that passed the RoHS (Restriction of Hazardous Substance) compliance, which is one of the most stringent international regulations restricting hazardous chemicals from industrial products. This is part of Tsubaki's efforts to bring more ecological benefits to the environment.
Neptune Chain is now available around the world. Tsubaki's global network is happy to welcome any inquiries and any further questions about specifications or details of Neptune Chain.
The Tsubaki group includes 42 factories and 36 sales companies worldwide. Our production and sales networks are more fully developed than ever. For more information please contact the Tsubaki representative in your region.
]]>There are 19 brands of cam clutches, of which nearly 8,000 types are listed. Simply select the different brands and types by ticking the boxes, and the interchange tool will help you find the equivalent Tsubaki model of cam clutch from its line-up of backstop clutches.
The new Cam Clutch Interchange Tool may be found on the Cam Clutch product page.
]]>Date : 17th - 20th Dec., 2013
Venue : Stall #B33-4 at Hall #18, Pragati Maidan, New Delhi
]]> TIPL exhibited a moving Power Cylinder kit, drive chain, heavy duty chain, conveyor chain, plastic chain, Power Lock, couplings, Cam Clutch, Torque Limiter, Shock Guard, Shock Relay, etc. The customers' response was very good. We received a lot of inquiries for TEM Products, especially the Power Cylinder.Visitor's response was good and many were excited to see the working sample of the Power Cylinder kit in motion.
]]>Please do not hesitate to contact Tsubaki Indonesia or its authorized distributors for more information. The Company will continue to update this website with the latest corporate and product information, and keep customers up to date with recent technology developments.
For more information regarding the Company, contact Tsubaki Indonesia directly.
]]>